{{:wiki:tools:tablesaw.jpeg?500|}}

====== Information ======

^ Status             | Operational as of February 2026                        |
^ Model | Sawstop Professional Cabinet Saw 1.75hp |
^ Training           | Mandatory                                    |
^ Hackable           | NO                                                              |
^ Usage Restrictions | Trained Members Only                     |
^ Owner              | VHS                                          |
^ If it Breaks       | Put a "broken" sign on machine, post in #woodworking on slack |
^ Loan Status        | Owned                  |
^ Arrival Date       | March 5, 2021                                                             |
^ Location           | Woodshop                                  |
^ Value              | $Many                                                              |

====== Manual ======
[[https://www.sawstop.ca/support/manuals/professional-cabinet-saw/]]

====== Safety at a Glance ======

**TRAINING REQUIRED**
Please note, even if you have previous experience, TRAINING IS REQUIRED

__Mandatory:__
  * Safety Glasses
  * Non-slip, covered footware
  * Push Stick (Accessible)
  * Sober (under no influence of drugs/alcohol/tiredness/etc)

__Optional but recommended:__
  * Leather Work Boots
  * Respiratory Protection
  * Hearing Protection

__Prohibited:__
  * Any gloves
  * Jewelry, Long Hair (tie back), and loose fitting clothing.

__Watch This:__
  * [[https://www.youtube.com/watch?v=u7sRrC2Jpp4]]

====== Safe Operation ======

__Description:__

TBD

===== Maintenance Log ====

Any maintenance, repairs, relocations, changes, etc to the tool should be logged below with a note, date and who!

Suggested maintenance schedule:
  * Weekly: Open side door and vacuum dust and chips.
     * This maintenance item doesn't need to be logged below.
  * Monthly: Clean and lubricate lift and tilt mechanisms.
     * Please record this below

How to Lubricate lift and tilt mechanisms:
https://www.youtube.com/watch?v=D_6SwIawU7U&ab_channel=SawStop


^ Date                      ^ Note           ^ Who       ^
| October, 2017    | DeWalt Arrived           |                |
| February, 2021   | DeWalt Sold             |                |
| March 5, 2021   | SawStop Arrived    |                |
| January 8, 2025  | Repairs: trunnion, elevation gears, etc. replaced | Mann Tools & Repair and Bill|
| July 27, 2025  | Repairs: trunnion, worm gear, shaft assembly replaced | Michael L, Blair K, Nico D, Nick A|