Differences

This shows you the differences between two versions of the page.

--- tool:laser_cutter:settings [2021/12/27 21:32] – Added Chrome Tanned Leather to banned list tyisi
+++ tool:laser_cutter:settings [2022/09/27 01:05] (current) – david_neufeld
@@ Line 25: / Line 25: @@
 ===== Plastics =====
-^ Material						^ Mode		^ Speed	^ Power	^ Corner Power	^ Passes	^ Notes ^
+^ Material					^ Mode		^ Speed	^ Power	^ Corner Power	^ Passes	^ Notes ^
 | Acrylic - 1/4"				| Cut		| 10	| 55	| 55		| 1		|    |
 | Acrylic - 1/16"				| Cut		| 20	| 60	| 60		| 1		|    |
-| Polypropylene (0.75mm)		| Cut		| 30	| 50	| 45		| 1		| From Yoko-yaya, ideal for painting stencils (John) |
+| Acrylic - 4.5mm   | Cut   | 23   | 50   | 50   | 1  |
-| EVA Foam (very thin, < 4mm)	| Cut		| 	| 	| 		| 1		| Michaels |
+| Polypropylene (0.75mm)			| Cut		| 30	| 50	| 45		| 1		| From Yoko-yaya, ideal for painting stencils (John) |
-| EVA Foam (thin, ~1/4")		| Cut		| 	| 	| 		| 1		| Bought online, could not find locally |
+| EVA Foam (very thin, < 4mm)			| Cut		| 	| 	| 		| 1		| Michaels |
+| EVA Foam (thin, ~1/4")			| Cut		| 	| 	| 		| 1		| Bought online, could not find locally |
 | EVA Foam (thick, 1/2" floor mats)		| Cut		| 30	| 50	| 50		| 1		| Canadian Tire, Home Depot, etc. |
-| PET/PETG (e.g. Mylar(tm) )						| Cut		| 	| 	| 		| 1		|  |
+| PET/PETG (e.g. Mylar(tm) )			| Cut		| 	| 	| 		| 1		|  |
-| Kapton Polyimide Film |  | | | | | [[http://wcam.engr.wisc.edu/Public/Safety/MSDS/Kapton%20Polyimide%20Film%20-%20Dupont.pdf|MSDS]]|
+| PET/PETG (1/16")				| Cut		| 30	| 45	| 		| 1		| From Associated Plastics |
+| Kapton Polyimide Film				|		|	|	|		|		| [[http://wcam.engr.wisc.edu/Public/Safety/MSDS/Kapton%20Polyimide%20Film%20-%20Dupont.pdf|MSDS]] |
 | Styrene - 2mm					| Cut		| 	| 	| 		| 1		| 2mm white styrene sheet from hobby stores   |