tool:laser_cutter:settings
This is an old revision of the document!
Table of Contents
Laser Cutter Awesomeness Ingredients!
Behaviour | Description |
---|---|
Cut | Mode=Cut in software, will pierce material |
Etch | Mode=Cut in software, will mark material |
Raster | Mode=Etch in software, will mark material |
This is fairly outdated and shouldn't be taken as gospel, but it is a good starting point.
Banned Materials
Material | Reason |
---|---|
Wet or 'raw' wood | Clogs up filter BADLY |
MDF, HDF, Ply, and reconstructed wood | Clogs up filter BADLY |
Coroplast | Clogs up filter BADLY |
Lexan/Polycarbonate/Makrolon | Dense black smoke and toxic fumes - bisphenol a (BPA), phenol, and more |
ABS | Dense black smoke and toxic fumes - cyanide and styrene gases |
PVC, Vinyl | Toxic and corrosive fumes - chlorine gas |
Neoprene (polychloroprene) | Toxic and corrosive fumes - chlorine gas |
Foam core | Dense black smoke and toxic fumes - styrene gas (carcinogenic, toxic to the nervous system and upper respiratory tract; classified as “very toxic”) |
Delrin | Toxic fumes - formaldehyde |
Moleskine notebook covers | Toxic fumes - chlorine - See Polymer burnination link at bottom |
Approved and Successful Material Settings
* = Please avoid the use of woods with any water, sap, or a high proportion of glue. We're re-evaluating their use due to severely and VERY quickly clogging the filtration system and substantial residue being left on the laser cutter.
Material | Mode | Speed | Power | Corner Power | Passes | Notes |
---|---|---|---|---|---|---|
Card Stock | Etch | 35 | 10 | 10 | 1 | N/A |
Card Stock | Cut | 35 | 35 | 25 | 1 | N/A |
Card Stock | Raster | ??? | ??? | ??? | 1 | N/A |
Heavy paper | Cut | 200 | 20 | 20 | 1 | Worked barely; long straight cuts needed multiple passes, and a few corners were missed. Use lower speed |
Picture Matting | Cut | 40 | 50 | 40 | 1 | N/A |
Acrylic - 1/4“ | Cut | 7 | 55 | 55 | 1 | N/A |
Acrylic - 1/16” | Cut | 7 | 100 | 100 | 1 | N/A |
Acrylic - 1/16“ | Cut | 55 | 100 | 100 | 1 | This will etch fast without cutting |
Acrylic - 1/16” | Cut | 25 | 25 | 25 | 1 | This will etch fast without cutting (same as the 55x100x100 better on coners) |
Styrene - 2mm | Cut | 20 | 100 | 100 | 1 | 2mm white styrene sheet from hobby stores |
Leather | Cut | 50 | 35 | 100 | 1 | Leather from Dressew scrap bin (Paul) |
Polypropylene (0.75mm) | Cut | 30 | 50 | 45 | 1 | From Yoko-yaya, ideal for painting stencils (John) |
Plywood 1/4“ Birch | Cut | 40 | 50 | 45 | 2 | From Home Depot ~$50 for 8'x4' |
Plywood 1/8” Birch | Cut | 16 | 55 | 55 | 1 | From Windsor Plywood ~$17 for 5'x5' |
Plywood 1/8“ Birch | Engrave | 80 | 28 | 28 | 1 | Deep etching, excellent for countersinking screw holes |
Plywood 4.2mm FSC Virola | Cut | 40 | 50 | 45 | 2 | From Home Depot ~$20 for 8'x4' SKU 1000-125618 (Tom) |
Plywood 1/4” Flooring underlay | Cut | 7 | 80 | 75 | 1 | From Home Depot ~$9 for 4'x4' (John) |
EVA Foam (very thin, < ~4mm) | Cut | ??? | ??? | ??? | 1 | Michaels |
EVA Foam (thin, ~1/4“) | Cut | ??? | ??? | ??? | 1 | Bought online, could not find locally |
EVA Foam (thick, 1/2” floor mats) | Cut | ??? | ??? | ??? | 1 | Canadian Tire, Home Depot, etc. |
Failed Settings
Material | Mode | Speed | Power | Corner Power | Passes | Notes |
---|---|---|---|---|---|---|
Acrylic - 1/16“ | Cut | 25 | 15 | 15 | 1 | Trying to etch with the cut setting. The outline is visible but not great. |
FURTHER INFORMATION
- Burnination method for identifying unknown polymers - READ THIS BEFORE CUTTING UNKNOWN MATERIALS
- Pololu banned materials list - Some of their allowable settings are different because they have a different(read: expensive) fume/ventilation system
tool/laser_cutter/settings.1441747510.txt.gz · Last modified: 2015/12/12 14:31 (external edit)