Old Revisions

These are the older revisons of the current document. To revert to an old revision, select it from below, click Edit this page and save it.

2022/09/27 01:05 tool:laser_cutter:settings – david_neufeld ±0 B (current)
2022/09/21 05:52 tool:laser_cutter:settings – david_neufeld +56 B
2022/08/24 20:36 tool:laser_cutter:settings – PETG entry tyisi +83 B
2021/12/27 21:32 tool:laser_cutter:settings – Added Chrome Tanned Leather to banned list tyisi +50 B
2021/10/18 16:43 tool:laser_cutter:settings – add Cermark & Laserbond jon_grieman +253 B
2021/10/13 07:27 tool:laser_cutter:settings – Added further information for cutting felt aibhlin_mowle +6 B
2019/10/17 04:49 tool:laser_cutter:settings – Increased speed for 1/8 ply from 16 to 24 tristan_lane ±0 B
2019/07/14 02:29 tool:laser_cutter:settings – add cork under provisional approval jdmc +319 B
2019/05/30 21:59 tool:laser_cutter:settings – jdmc +153 B
2018/09/19 01:45 tool:laser_cutter:settings – jdmc +2 B
2018/09/19 01:44 tool:laser_cutter:settings – jdmc +16 B
2018/06/05 05:47 tool:laser_cutter:settings – jdmc +51 B
2017/10/05 19:21 tool:laser_cutter:settings – jdmc +227 B
2017/10/05 18:00 tool:laser_cutter:settings – jdmc +109 B
2017/10/05 17:54 tool:laser_cutter:settings – add backlinks jdmc +74 B
2017/10/05 17:22 tool:laser_cutter:settings – jdmc +87 B
2017/10/05 17:06 tool:laser_cutter:settings – Reorganization jdmc +89 B
2017/08/01 01:41 tool:laser_cutter:settings – lbuchy +135 B
2016/12/04 18:44 tool:laser_cutter:settings – lukecyca ±0 B
2016/12/04 18:44 tool:laser_cutter:settings – Majorly reorganized this page (but didn't substantially change the content) lukecyca ±0 B
2016/10/18 21:40 tool:laser_cutter:settings – tested and updated settings for 1/2" EVA miststlkr ±0 B
2016/09/20 05:21 tool:laser_cutter:settings – tyisi ±0 B
2016/08/22 18:40 tool:laser_cutter:settings – miststlkr ±0 B
2016/08/22 18:40 tool:laser_cutter:settings – miststlkr ±0 B
2016/08/22 18:40 tool:laser_cutter:settings – miststlkr ±0 B
2016/02/15 09:11 tool:laser_cutter:settings – Added link to Identifying Unknown Polymers shane ±0 B
2015/12/12 14:31 tool:laser_cutter:settings – external edit 127.0.0.1 ±0 B
2015/11/06 15:55 tool:laser_cutter:settings – add PET/PETG lytfyre ±0 B
2015/09/08 21:25 tool:laser_cutter:settings – rsim ±0 B
2015/09/08 21:23 tool:laser_cutter:settings – rsim ±0 B
2015/04/06 22:59 tool:laser_cutter:settings – lytfyre ±0 B
2014/09/10 17:45 tool:laser_cutter:settings – Added neoprene to banned list bruce ±0 B
2014/07/11 21:07 tool:laser_cutter:settings – butters ±0 B
2013/12/31 07:09 tool:laser_cutter:settings – Added Moleskine note, links to burnination method for polymer identification jarrett ±0 B
2013/12/18 00:05 tool:laser_cutter:settings – jarrett ±0 B
2013/12/18 00:02 tool:laser_cutter:settings – jarrett ±0 B
2013/11/28 22:01 tool:laser_cutter:settings – jarrett ±0 B
2013/11/22 21:02 tool:laser_cutter:settings – jarrett ±0 B
2013/11/21 19:06 tool:laser_cutter:settings – created jarrett ±0 B