User Tools

Site Tools


tool:laser_cutter:settings

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Next revisionBoth sides next revision
tool:laser_cutter:settings [2018/09/19 01:45] jdmctool:laser_cutter:settings [2019/07/14 02:29] – add cork under provisional approval jdmc
Line 18: Line 18:
 | Plywood 1/4" Birch | Cut | 40 | 50 | 45 | 2 | From Home Depot ~$50 for 8'x4' | | Plywood 1/4" Birch | Cut | 40 | 50 | 45 | 2 | From Home Depot ~$50 for 8'x4' |
 | Plywood 1/8" Birch | Cut | 16 | 55 | 55 | 1 | From Windsor Plywood ~$17 for 5'x5' | | Plywood 1/8" Birch | Cut | 16 | 55 | 55 | 1 | From Windsor Plywood ~$17 for 5'x5' |
 +| Plywood 1/8" Maple| Cut | 16 | 55 | 55 | 1 | |
 | Plywood 1/8" Birch | Etch | 80 | 28 | 28 | 1 | Deep etching, excellent for countersinking screw holes | | Plywood 1/8" Birch | Etch | 80 | 28 | 28 | 1 | Deep etching, excellent for countersinking screw holes |
 | Plywood 4.2mm FSC Virola | Cut | 40 | 50 | 45 | 2 | From Home Depot ~$20 for 8'x4' SKU 1000-125618 (Tom)| | Plywood 4.2mm FSC Virola | Cut | 40 | 50 | 45 | 2 | From Home Depot ~$20 for 8'x4' SKU 1000-125618 (Tom)|
-| Plywood 1/4" Flooring underlay | Cut | 12 | 60 | 60 | 1 | From Home Depot ~$9 for 4'x4' (John)|+| Plywood 1/4" Flooring underlay | Cut | 12 | 60 | 60 | 1 | From Home Depot ~$9 for 4'x4' |
  
  
Line 37: Line 38:
 ===== Fabric ===== ===== Fabric =====
 ^ Material ^ Mode ^ Speed ^ Power ^ Corner Power ^ Passes ^ Notes ^ ^ Material ^ Mode ^ Speed ^ Power ^ Corner Power ^ Passes ^ Notes ^
-| Leather | Cut | | | | 1 | Leather from Dressew scrap bin (Paul) |+| Leather (Vegetable Tanned) | Cut | | | | 1 |  |
 | Felt | Cut | | | | |    | | Felt | Cut | | | | |    |
  
 ===== Other ===== ===== Other =====
 ^ Material ^ Mode ^ Speed ^ Power ^ Corner Power ^ Passes ^ Notes ^ ^ Material ^ Mode ^ Speed ^ Power ^ Corner Power ^ Passes ^ Notes ^
 +| Application Tape | | | | | | Small amounts used for masking |
 +| Painters Tape | | | | | | Small amounts used for masking |
  
 ===== Etch Only ===== ===== Etch Only =====
Line 64: Line 67:
 | Fiberglass | Hazardous dust | | Fiberglass | Hazardous dust |
 | Printed Circuit board | Hazardous dust | | Printed Circuit board | Hazardous dust |
 +
 +
 +====== Provisionally Approved ======
 +The following materials have been provisionally approved by the Laser Cutter Committee for testing: 
 +
 +^ Material ^ Mode ^ Speed ^ Power ^ Corner Power ^ Passes ^ Notes ^
 +| Cork | Cut | TBD | TBD | TBD | TBD |    |
 +| Cork | Etch | TBD | TBD | TBD | TBD |    |
  
 ====== FURTHER INFORMATION ====== ====== FURTHER INFORMATION ======
tool/laser_cutter/settings.txt · Last modified: 2022/09/27 01:05 by david_neufeld

Except where otherwise noted, content on this wiki is licensed under the following license: Public Domain
Public Domain Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki